Kia Sportage: SRSCM / Front Impact Sensor (FIS) Components and components location

Front Impact Sensor (FIS) Description and operation

Description • The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision ...

Front Impact Sensor (FIS) Repair procedures

Removal 1. Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. 2. Disconnect the ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Water Temperature Control Assembly Repair procedures

Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Drain the engine coolant so its level is below water temperature control assembly. ...

Kia Sportage QL (2015-2026) Service Manual: Direct Electro Hydraulic Actuator Coupling Repair procedures

Inspection    All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid is therefore not necessary (zero maintenance, l ...