Kia Sportage: Lighting System / Front Fog Lamps Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper. (Refer to Body - "Front Bumper Cover")

3.	Remove the front fog lamp assembly (A) after loosening the mounting screws.

Installation

1.	Install the front fog lamp assembly.

2.	Connect the front fog lamp connector.

3.	Install the front bumper.

4.	Connect the negative (-) battery terminal.

Rheostat Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash P ...

License Lamps Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp after pushing the locking hooks (A). ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Transaxle Control Module (TCM) Repair procedures

Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the back of harness connector as the inspection point of TCM side.) Spec ...

Kia Sportage QL (2015-2026) Service Manual: Temperature Control Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when 12V is connecte ...