Kia Sportage: Seat Belt System / Emergency Fastening Device (EFD) Description and operation
The Emergency Fastening Device (EFD) operates at the same time with the Seat
Belt Pretensioner when it satisifies the deployment condition after a collision.
It is an auxiliary equipment to prevent a driver and passenger from breaking
away by pulling the seat belt toward the anchor side after a collision.
It is located near the anchor on the driver and passenger seat and is supported
by two cables.
|
Never measure the resistance of the anchor pretensioner directly, the
current of the measuring device may cause unexpected airbag deploy.
|
Removal
1.
Disconnect the battery negative terminal, and wait for at least three
minutes before beginning to work.
2.
Remove the do ...
Components
1. EFD (Emergency Fastening
Device) System
...
Other information:
Removal and Installation
Front Muffler
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Detach the rubber hanger (A) from the front muffler.
...
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
- Curved roads, tollgates, etc.
- The surrounding of the sensor cover is dirty with rain, snow, mud, etc.
- The rear bumper near the sensor is covered or obstructed with forei ...