Kia Sportage: Engine Control System / E-CVVT motor Components and components location

Appearance of E-CVVT is similar to that of hydraulic CVVT. Connector that drives DC motor and protection cover that protects the motor are mounted on the upper part. DC motor that drives the CVVT is mounted inside and covering part is sealed in order to protect oil from flowing inside.

Variable Charge Motion Actuator (VCMA) Repair procedures

Removal 1. Turn the ignition switch off and disconnect the battery (-) terminal. 2. Remove variable charge motion actuator connector ...

E-CVVT motor Description and operation

Description Electric E-CVVT system is electric continuous variable valve timing system. It is located on the intake camshaft of the engine and uses motor rotation to control the ...

Other information:

Kia Sportage QL (2015-2020) Service Manual: Front Door Belt Inside Weatherstrip Repair procedures

Replacement [Front door belt inside weatherstrip] 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A). 3. ...

Kia Sportage QL (2015-2020) Owners Manual: Operating conditions

The indicator on the switch will illuminate when the Blind Spot Detection System (BSD) switch is pressed with the Engine Start/Stop Button ON. If vehicle speed exceeds 20 mph (32 km/h), the system will activate. If you press the switch again, the switch indicator and system will be turned off ...