Kia Sportage: Driveshaft and axle / Driveshaft Assembly

Repair procedures

Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 9 ...

Front Driveshaft Components and components location

Component Location (1) [Equal type] 1. Drive shaft (LH) 2. Drive shaft (RH) 3. Inner shaft bearing bracket [Unequal type] ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Receiver-Drier Repair procedures

Replacement 1. Remove the condenser. 2. Remove the cap (B) from the bottom of the condenser using an L wrench (A). Tightening torque : 9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft) ...

Kia Sportage QL (2015-2026) Owners Manual: Electronic Stability Control (ESC) Indicator Light

This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the ESC system. In this case, have your vehicle inspected by an authorize ...