Kia Sportage: Cooling System / Cooling Fan Description and operation

Kia Sportage QL (2015-2025) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Description and operation

Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
[Non-Air conditioning type]
The cooling fan operates in 1 stages (HIGH). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
Cooling Fan Components and components location
Components 1. Cooling fan 2. Fan motor 3. Cooling fan shroud 4. Cooling fan resistor ...

Cooling Fan Specifications
Specifications Item Specification Fan type Puller Fan speed control Resistor Air ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Hood Latch Repair procedures


Replacement 1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover") 2. Disconnect the hood lower latch connector (A). 3. Remove the air duct (A). ...

Kia Sportage QL (2015-2025) Service Manual: Auto Light Sensor Repair procedures


Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function Switch is turned ON ...

Copyright © www.ksportagegl.com 2015-2025