Other information:
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the KDS/GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disco ...
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) from the bottom of the condenser using an L wrench
(A).
Tightening torque :
9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft)
...