Kia Sportage: Lighting / Check headlight
.png)
This warning message illuminates if there is a malfunction (burned-out bulb except
LED lamp or circuit malfunction) with the headlamp. In this case, have your vehicle
inspected by an authorized Kia dealer.
✽ NOTICE
- When replacing the bulb, use the same wattage bulb. For more information,
refer to “BULB WATTAGE” in chapter 8.
- If the different wattage bulb is equipped with the vehicle, this warning
message is not displayed.
Fog lights are used to provide improved visibility when visibility is poor due
to fog, rain or snow, etc. The fog lights will turn on when the fog light switch
(1) is turned to the on position a ...
Adaptive front lighting system uses the steering angle and vehicle speed, to
keep your field of vision wide by swiveling and leveling the headlamp.
Change the switch to the AUTO position when the ...
Other information:
Description
4WD ECU processes signals from various sensors and determines the current road
and driving conditions. The ECU then utilizes this information to implement
precision control over the 4WD coupling's multi-plate clutch and variably adjust
the amount of torque d ...
1. Raise the wiper arm and pull out the wiper blade assembly.
2. Install the new blade assembly by inserting the center part into the slot
in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
To prevent damage to the ...