Kia Sportage: Blind Spot Detection system / Blind Spot Detection Switch Components and components location

Blind Spot Detection Radar Calibration Repair procedures

Inspection Correction Overview Need to calibrate the mounting angle of the BSD when a vehicle has a rear or a side collision with BSD system even just replacing a BSD bracket or ...

Blind Spot Detection Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Front Oil Seal Repair procedures

Replacement 1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley") 2. Remove the front oil seal (A). 3. Install the crankshaft front oil se ...

Kia Sportage QL (2015-2026) Service Manual: Repair procedures

Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...