Kia Sportage: Manual heating and air conditioning / Air intake control

Kia Sportage QL (2015-2026) Owners Manual / Features of your vehicle / Automatic climate control system / Manual heating and air conditioning / Air intake control

This is used to select the outside (fresh) air position or recirculated air position.

To change the air intake control position, push the control button.

Outside (fresh) air position

With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

Recirculated air position

With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.

In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

Temperature control
The temperature will increase to the maximum (HI) by turning the knob to the extreme right. The temperature will decrease to the minimum (Lo) by turning the knob to the extreme left. When turn ...

Sunroof inside air recirculation
If the sunroof opens while the heater or Air Conditioning system operates, the outside (fresh) air will be selected automatically for ventilating the car. Then, if you select the recirculated air ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Fuel Pressure Sensor (FPS) Description and operation


Description The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel pump and measures the pressure in the low pressure fuel line.Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determ ...

Kia Sportage QL (2015-2026) Service Manual: Smart Key Unit Repair procedures


Removal Smart Key Unit    Take care not to scratch the crash pad and related parts. [LHD] 1. Disconnect the negative (-) battery terminal. 2. ...

Copyright © www.ksportagegl.com 2015-2026