Kia Sportage: Brake System / Vacuum Pump Components and components location

1. Vacuum pump
|
2. O -ring
|

1. Vacuum pump
|
2. O -ring
|

1. Vacuum pump
|
2. O -ring
|
Brake Booster Operating
Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, ...
Remove
[Nu 2.0 MPI/ FFV, THETA II 2.4 GDI]
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remov ...
Other information:
Removal
1.
Release the residual pressure in fuel lin.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual
Pressure in Fuel Line")
2.
Remove the rear seat cushion (Refer to "Seat" ...
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance with the air/fuel ratio.
The sensor must be hot in order to operate n ...