Error Item
|
Failure symptom
|
Inspection items
|
Detailed inspections
|
Relevant Parts/
Components
|
Screen display
|
LCD screen does not turn on
|
|
| 1) |
Check the connector attachments
|
| 2) |
Check B+, IGN and GND wiring
|
|
Connectors, wiring, fuses, dashboard
|
Warning light
|
Airbag warning lamp malfunction
|
|
| 1) |
Check airbag + signal (connectors)
|
| 2) |
Check C-CAN (ACU4) signal
|
| 3) |
Check the FPC attachment inside the dashboard
|
|
ACU Connectors, wiring, fuses, dashboard
|
Mode conversion
|
Integrated driving mode malfunction
|
|
| 1) |
Check the switch input (connector)
|
| 2) |
Check the switch signal input
(disconnection or shorting)
|
| 3) |
Check conversion with dashboard component
|
|
Switch connector, wiring dashboard
|
Illumination
|
Interior light brightness cannot be controlled.
|
|
| 1) |
Check if the light switch's input signal reaches the connector
|
| 2) |
Check ILL- and DETENT signals
|
| 3) |
Check the TAIL+ signal input
|
|
Switch connector, wiring dashboard
|
Warning Sound
|
No dashboard alarm
|
|
| 1) |
Check the speaker output connector
|
| 2) |
Check the car speakers
|
|
Speaker connectors, wiring dashboard
|
Fuel indicator
|
Faulty fuel gauge indication
|
|
| 1) |
Check fuel input and GND connectors
(open, short or input resistance values)
|
|
Fuel sender connector, wiring dashboard
|
Other information:
This warning light blinks:
Once you set the Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off.
When there is a malfunction with the AFLS.
If there is a malfunction with the AFLS:
1. Drive carefully to the nearest safe location a ...
Infant or small child
All 50 states have child restraint laws. You should be aware of the specific
requirements in your state. Child and/or infant seats must be properly placed and
installed in the rear seat. For more information about the use of these restraints,
refer to “Child restraint ...
Instrument Cluster Components and components location