Other information:
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
3. Remove the bulb from bulb-socket by pulling it out.
4. Insert a ...
Always observe the following:
Check tire pressure when the tires are cold. (After the vehicle has been
parked for at least three hours or hasn't been driven more than one mile (1.6
km) since startup.)
Check the pressure of your spare tire each time you check the pressure
of other ...