Kia Sportage: Light bulbs / Tailgate room lamp bulb replacement
.png)
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the lamp housing notches and snap the lens
into place.
✽ NOTICE
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to ...
Other information:
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
When the engine is cool, drain the engine coolant from the radiator ...
Here are some important points if you decide to pull a trailer:
Consider using a sway control.You can ask a hitch dealer about sway control.
Do not do any towing with your vehicle during its first 1,200 miles (2,000
km) in order to allow the engine to properly break in. Failure to heed this ...