Other information:
Removal
1.
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learning
with the GDS tool.
(Refer to 4WD Control System - "Repair procedures")
2.
Disconnect the battery negative cable from the battery ...
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembly.
3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise
unti ...