Kia Sportage: Lighting System / Rheostat Components and components location

Inspection
1.
Check for continuity between terminals. If the continuity is not as
specified, replace the hazard lamp switch.
[Manual type]
...
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash P ...
Other information:
Inspection
Operating Logic Test (Manual only)
Inspect the PTC operation by confirmation logic as follows;
1.
Entering
(1)
Set the Floor mode and maximum heating position.
(2)
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
3.
Disconnect the power tailgate latch connector (A) and PCU assem ...