Other information:
11. Immediately drive approximately 4~6 miles (7~10 km or, about 10 min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed
of 12 mph (20 km/h).
While driving, if you experience any unusual vibration, ride disturbance ...
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor
must be replaced (after removing the resistor).
Replacement
...