Kia Sportage: Light bulbs / Front turn signal lamp bulb replacement
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembly.
3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise
until the tabs on the bulb align with the slots in the bulb-socket. Pull the bulb
out of the bulb-socket
4. Insert a new bulb by inserting it into the bulb-socket and rotating it until
it locks into place.
5. Install the socket in the headlamp assembly by aligning the tabs on the bulb-socket
with the slots in the assembly. Push the bulb-socket into the headlamp assembly
and turn the socket clockwise.
WARNING - Halogen bulbs
Handle halogen bulbs with care.
Halogen bulbs contain pressurized gas that will produce flying pieces
of glass if broken.
Always handle them carefully, ...
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembl ...
Other information:
The indicator on the switch will illuminate when the Blind Spot Detection System
(BSD) switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds 20 mph (32 km/h), the system will activate. If you press
the switch again, the switch indicator and system will be turned off ...
Inspection
Check if the auto light control operates like a timing chart shown below. Tail
lamp output and head lamp (Low) output is controlled based on the auto light
sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function
Switch is turned ON ...