Kia Sportage: Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Specifications
Kia Sportage QL (2015-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Specifications
| Specification |
|
Item |
Specification |
|
Control type |
N/H (Normal High) |
|
Control pressure (kpa (kgf/cm², psi)) |
0 - 1569.06 (0 - 16, 0 - 227.57) |
|
Currency (mA) |
0 - 1100 |
|
Coil resistance (Ω) |
5.3 ± 0.3 |
Underdrive Brake Control Solenoid Valve (UD/B_VFS) Repair procedures
Inspection
1.
Switch "OFF" ignition.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - &qu ...
Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Components and components
location
Component Location
1. 26 Brake Control Solenoid
Valve (26/B)
2. 35R Clutch Control Solenoid Valve (35R/C)
3. Underdrive Brake Control Solenoid Valve (UD/B)
...
Other information:
Kia Sportage QL (2015-2025) Owners Manual: Blind spot detection system (BSD)
The Blind Spot Detection System (BSD) uses a radar sensor to alert the driver. It senses toward the rear sides of the vehicle and provides and early warning to the driver. (1) BSD (Blind Spot Detection) The warning range depends on your vehicle speed. However, if your vehicle is about 6 mph ...
Kia Sportage QL (2015-2025) Service Manual: Description and operation
Description Automatic transaxle control system relies on various measurements to determine the current control status and determine the necessary compensation values. These values are used to control the actuators and achieve the desired control output. Operation ...
Copyright © www.ksportagegl.com 2015-2025
