Other information:
Your vehicle may require the ignition switch to be turned to the ACC position
for programming and/or operation of HomeLink. It is also recommended that a new
battery be replaced in the hand-held transmitter of the device being programmed
to HomeLink for quicker training and accurate transmissi ...
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) from the bottom of the condenser using an L wrench
(A).
Tightening torque :
9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft)
...