Kia Sportage: Lighting System / Headlamps Description and operation

Kia Sportage QL (2015-2024) Service Manual / Body Electrical System / Lighting System / Headlamps Description and operation

Description
HID Headlamp
1.
Bulb
(1)
Elements
Xenon gas: Xenon gas activates the initial reaction for rapid illumination.
Molybdenum electrode: anode arcing
Metal halide salts: color component
(2)
Lightening principle
When Xenon gas and metal halide salt will discharge the molybdenum anode in a capsule, it emits light.
2.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.

3.
Ballast
(1)
Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.
(2)
Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.

BI-FUNCTION
1.
Definition
A headlamp with integrated functions of high and low beam
The light is controlled by rotating the shield inserted to the lens. (A solenoid is adopted.)

2.
Structure and mechanism
When working as a low beam
: The light illuminates to the restricted area of low beam by blocking the light with the stopped shield.

When working as a high beam
: The light is not blocked by the open shield and the light illuminates to the area of high beam.

Components and components location
Component Location 1. Headlamp (Low/High Bi-function) 2. Position lamp / Daytime Running Light (DRL) 3. Turn signal lamp 4. Fog lamp 5. Turn signal ...

Headlamps Repair procedures
Inspection 1. Check the battery voltage. (Low beam will be on when the battery voltage is above 9 V.) 2. Check the fuse and relay. ...

Other information:

Kia Sportage QL (2015-2024) Service Manual: Rear Bumper Cover Components and components location


Component Location 1. Rear bumper cover ...

Kia Sportage QL (2015-2024) Owners Manual: Engine oil


Checking the engine oil level ■ THETA 2.4L - GDI ■ THETA 2.0L T-GDI 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil p ...

Copyright © www.ksportagegl.com 2015-2024