Kia Sportage: Light bulbs / Headlamp (HID type) bulb replacement
If the light bulb does not operate, have the vehicle checked by an authorized Kia dealer.
WARNING - HID Headlamp (if equipped)
Do not attempt to replace or inspect the HID headlamp (XENON bulb) due to electric shock danger. If the light bulb does not operate, have your vehicle checked by an authorized Kia dealer.
✽ NOTICE
HID lamps have superior performance vs. halogen bulbs. HID lamps are estimated by the manufacturer to last twice as long or longer than halogen bulbs depending on their frequency of use. They will probably require replacement at some point in the life of the vehicle. Cycling the headlamps on and off more than typical use will shorten HID lamps life. HID lamps do not fail in the same manner as halogen incandescent lamps. If a headlamp goes out after a period of operation but will immediately relight when the headlamp switch is cycled it is likely the HID lamp needs to be replaced. HID lamping components are more complex than conventional halogen bulbs thus have higher replacement cost.
Light bulb position (Side)
(1) Side repeater lamp (LED type) ...
Headlamp (High/Low beam) bulb replacement
1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Remove the bulb-socket from the headlamp assembly by turni ...
Other information:
Kia Sportage QL (2015-2023) Owners Manual: Automatic climate control system
To defog inside windshield 1. Set the fan speed to the desired position. 2. Select desired temperature. 3. Press the defroster button (). 4. The outside (fresh) air position will be selected automatically and the air conditioning will turn on according to the detected ambient temperature. I ...
Lincoln Corsair Owners Manual: Resetting the Stopping Position - Vehicles With: Power Adjustable Steering Column. Horn. Switching the Heated Steering Wheel On and Off
Resetting the Stopping Position - Vehicles With: Power Adjustable Steering Column Note: The steering wheel stops when it detects an obstruction. This sets a new stopping position. To reset the steering column to its normal stopping position: Confirm there is nothing obstructing the motion of ...
