Kia Sportage: Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel

BJ Boot Repair procedures

Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint asse ...

Components and components location

Components 1. Brake disc 2. Dust cover 3. Hub bearing 4. Knuckle ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Evaporator Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminals “+” and “-” of the evaporator temperature sensor. ...

Kia Sportage QL (2015-2026) Owners Manual: Engine oil

Checking the engine oil level ■ THETA 2.4L - GDI ■ THETA 2.0L T-GDI 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil p ...