Kia Sportage: Engine Control System / CVVT Oil Control Valve (OCV) Schematic diagrams

Kia Sportage QL (2015-2026) Service Manual / Engine Control / Fuel System / Engine Control System / CVVT Oil Control Valve (OCV) Schematic diagrams

Circuit Diagram

Terminal Information

Terminal Illustration

Terminal Function

No.	Function	Connected to
1	Oil Control Valve (OCV) [Bank1/ Exhaust] control	ECM Connector B (86)
2	Battery power (B+)	Main Relay

CVVT Oil Control Valve (OCV) Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the exhaust valve in accordance with the ECM control signal which is calculated ...

CVVT Oil Control Valve (OCV) Repair procedures

Inspection Coil Resistance 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Variable Charge Motion Actuator (VCMA) Components and components location

Components ECM directly controls the actuator and VCM flap for link-structure intake manifold is operated when motor rotates. This creates air tumble. Motor and position sensor are mounted inside the actuator in order to receive the position of flap and send feedback to ECM. ...

Kia Sportage QL (2015-2026) Owners Manual: Operating conditions

The indicator on the switch will illuminate when the Blind Spot Detection System (BSD) switch is pressed with the Engine Start/Stop Button ON. If vehicle speed exceeds 20 mph (32 km/h), the system will activate. If you press the switch again, the switch indicator and system will be turned off ...