Kia Sportage: Automatic climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

Kia Sportage QL (2015-2024) Owners Manual / Features of your vehicle / Automatic climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative impact on the air conditioning system.

Therefore, if abnormal operation is found, have the system inspected by an authorized Kia dealer.

WARNING

The oil and refrigerant in your vehicle's air conditioning system is under very high pressure. If proper service procedures are not followed an explosion may result. To reduce the risk of serious injury or death, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.

CAUTION

It is important that the correct type and amount of oil and refrigerant is used, otherwise damage to the vehicle may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If ...

Air Conditioning refrigerant label
■ Example Each symbol and specification on the air conditioning refrigerant label is represented below : 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of Compre ...

Other information:

Kia Sportage QL (2015-2024) Service Manual: Repair procedures


Inspection AEB function ON / OFF switch was included to USM (User Setting Menu) and the state of the factory is ON. When the IGN On, maintain ON condition by default. And does not reflect the driver settings when next IGN On. If turned the ESC function Off, the AEB fu ...

Kia Sportage QL (2015-2024) Service Manual: Emergency Fastening Device (EFD) Repair procedures


Replacement 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the front anchor seat belt (A) by using the SST (0K888-D4200). ...

Copyright © www.ksportagegl.com 2015-2024