Kia Sportage: Exhaust Emission Control System / Catalytic Converter Repair procedures

Kia Sportage QL (2015-2026) Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter Repair procedures

Removal

WCC

1.	Remove the exhaust manifold. (Refer to Engine Mechanical System - "Exhaust Manifold")

UCC

1.	Remove the muffler. (Refer to Engine Mechanical System - "Muffler")

Installation

1.	Install in the reverse order of removal.

Catalytic Converter Description and operation

Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nit ...

CVVT (Continuously Variable Valve Timing) System Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is ...

Other information:

Kia Sportage QL (2015-2026) Owners Manual: Driver's Attention

The driver must be cautious in the below situations for the system may not assist the driver and may not work properly. - Curved roads, tollgates, etc. - The surrounding of the sensor cover is dirty with rain, snow, mud, etc. - The rear bumper near the sensor is covered or obstructed with forei ...

Kia Sportage QL (2015-2026) Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. Specification: 2.5 - 4.0Ω [20° ...