Kia Sportage: Brake System / Brake Pedal Components and components location

1. Brake pedal member assembly
2. Stop lamp switch
|
3. Brake pedal arm
|
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir
cap.
2.
Remove the brake fluid from the mast ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
( ...
Other information:
Component Replacement After
Deployment
Before doing any SRS repairs, use the KDS/GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
W ...
Specification
Item
Specification
Type
Hall effect sensor
Operating condition (°C)°F
(-40 to 150) -40 to 302
Output voltage (V)
High : 1.18 - 1.68
Low ...