Kia Sportage: Electronic parking brake (EPB) / Applying the parking brake
.png)
To apply the EPB (electronic parking brake):
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the warning light comes on.
Also, the EPB is applied automatically if the Auto Hold button is on when the engine is turned off. However, if you press the EPB switch after the engine is turned off, the EPB will not be Applied.
✽ NOTICE
On a steep incline or when pulling a trailer, if the vehicle does not remain at a standstill, do as follows:
1. Apply the EPB.
2. Pull up the EPB switch for more than 3 seconds.
Do not operate the parking brake/ EPB while the vehicle is moving except in an emergency situation.
✽ NOTICE
A click or electric brake motor whine sound may be heard while operating or releasing the EPB, but these conditions are normal and indicate that the EPB is functioning properly.
Releasing the parking brake
To release the EPB (electronic parking brake), press the EPB switch while doing
the following:
Have the ignition switch or engine start/stop button in the ON position.
Depress the brake peda ...
Other information:
Kia Sportage QL (2015-2025) Owners Manual: Fan speed control
■ Type A ■ Type B The fan speed can be set to the desired speed by operating the fan speed control button. To change the fan speed, press () the button for higher speed, or push () the button for lower speed. To turn the fan speed control off, press the front blower OFF button. ...
Kia Sportage QL (2015-2025) Service Manual: Engine Coolant Temperature Sensor (ECTS) Description and operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes resistance with the temperature. The electrical resistance of the ECTS d ...
