Kia Sportage: Brake system / Warning messages
Parking brake automatically locked
.png)
When the EPB is applied from Auto Hold, a warning will sound and a message will appear.
AUTO HOLD deactivating.
.png)
Press brake pedal
When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear.
✽ NOTICE
When this message is displayed, the Auto Hold and EPB may not operate. For your safety, depress the brake pedal.
Press brake pedal to deactivate AUTO HOLD
.png)
If you do not apply the brake pedal when you release the Auto Hold by pressing the [AUTO HOLD] switch, a warning will sound and a message will appear.
AUTO HOLD conditions not met. Close door, hood, and fasten seatbelt
.png)
When you press the [AUTO HOLD] switch, if the driver’s door, engine hood are not closed or the driver’s seat belt is unfastened, a warning will sound and a message will appear on the LCD display. At this moment, press the [AUTO HOLD] button after closing the driver’s door, engine hood and fastening the seat belt.
Cancel
To cancel the Auto Hold operation, press the Auto Hold switch. The AUTO HOLD
indicator will go out.
To cancel the Auto Hold operation when the vehicle is at a standstill, press
the Auto Hold sw ...
Anti-lock brake system (ABS)
ABS (or ESC) will not prevent accidents due to improper or dangerous driving
maneuvers. Even though vehicle control is improved during emergency braking, always
maintain a safe distance between yo ...
Other information:
Kia Sportage QL (2015-2025) Service Manual: Description and operation
Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft. 1. ...
Kia Sportage QL (2015-2025) Service Manual: Auto Light Sensor Repair procedures
Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function Switch is turned ON ...
