Kia Sportage: Engine Control System / Variable Intake Solenoid (VIS) Valve Description and operation

Kia Sportage QL (2015-2026) Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Description and operation

Description

Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table).

Operation

Engine condition	VIS valve	Operation
Medium speed	OFF	Increasing engine performance in low engine speed by reducing intake interference among cylinders
Low / High speed	ON	Minimizing intake resistance by shortening intake manifold length and increasing area of air entrance

Variable Intake Solenoid (VIS) Valve Components and components location

Components 1. Variable Intake Solenoid (VIS) Valve 2. Variable Intake Solenoid (VIS) Actuator 3. Variable Intake Solenoid (VIS) Flap 4. Vacuum Hose ...

Variable Intake Solenoid (VIS) Valve Schematic diagrams

Circuit Diagram Harnness Connector ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Instrument Cluster Repair procedures

Removal • Put on gloves to protect your hands. • When removing with a flat-tip screwdriver or remover, wrap protective tape aro ...

Kia Sportage QL (2015-2026) Service Manual: Components and components location

Components (1) [Rear seat back assembly] [LH] 1. Rear seat back covering 2. Rear seat back heater 3. Rear seat back pad 4. Rear seat back dust cover 5. Rear seat back frame 6. Rear seat back outer shiled cover ...