Kia Sportage: Engine Control System / Variable Charge Motion Actuator (VCMA) Description and operation

Variable charge motion actuator reinforces the tumble of the air that flows inside the cylinder, improves combustion performance, and enhances engine torque and fuel efficiency in low and mid speed range. ECM drives motor in On/Off type and controls VCMA. VCMA is usually "Closed" and creates tumble for the air intake when vehicle is started. When vehicle accelerates and reaches approx. 2,600 rpm, actuator operates VCM flap (Open) and facilitates the flow of air intake.

Variable Charge Motion Actuator (VCMA) Components and components location

Components ECM directly controls the actuator and VCM flap for link-structure intake manifold is operated when motor rotates. This creates air tumble. Motor and position sensor a ...

Variable Charge Motion Actuator (VCMA) Schematic diagrams

Circuit Diagram Harness Connector ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: PTC Heater Repair procedures

Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) ...

Kia Sportage QL (2015-2025) Service Manual: Repair procedures

Inspection Vapor hose 1. Check all the clamps for tightness and the connections for leakage. 2. Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation. Fuel filler cap ...