Kia Sportage: Body Electrical System / Special service tools

Kia Sportage QL (2015-2025) Service Manual / Body Electrical System / Special service tools

Special Service Tools
Tool Name / Number
Illustration
Description
RKE Battery Checker
(09954-2P100)

Measuring the RKE battery voltage
Calibration jig for LDWS or LKAS
(09890-3V100)

Calibration of LDWS (Lane Departure Warning System) or LKAS (Lane Keeping Assist System)
BSD Unit Correction Tool Set
(09958-3T000)

Used to correct the BSD unit.
Vertical Plumb
(09958-3T010)

Used to correct the BSD unit.Used to create a center line.
Optical Receiver
(09958-3T020)

Used to correct the BSD unit.Used to create a center line.
Front Setting Jig
(09958-3T030)

Used to correct the BSD unit.Used to create a center line.
Vertical Measuring Device Plate
(09958-3T040)

Used to correct the BSD unit.Used to create a center line.
Angle Measuring Plate
(09958-3T050)

Used to correct the BSD unit.Used to measure the horizontal angle.
Vertical Measuring Device
(09958-3T060)

Used to correct the BSD unit.Used to create a center line.
Spirit Level
(09958-3T070)

Used to correct the BSD unit.Used to measure the horizontal angle.
BSD Unit Fixing Adaptor
(09958-3T080)

Used to correct the BSD unit.Used to measure the horizontal angle.
Digital Protractor
(09958-3T090)

Used to correct the BSD unit.Used to measure the horizontal angle.
Digital Inclinometer
(09958-3T100)

Used to correct the BSD unit.Used to measure the vertical angle.

General information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check ...

Anti-theft System
...

Other information:

Kia Sportage QL (2015-2025) Service Manual: High Pressure Fuel Pump Repair procedures


Removal    In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair w ...

Kia Sportage QL (2015-2025) Service Manual: Repair procedures


Adjustment Description The friction material inside the coupling will degrade over time. Therefore, corresponding compensation values must be referenced and entered after replacing the controller or the coupling. Compensation Requirement and Procedure ...

Copyright © www.ksportagegl.com 2015-2025