Kia Sportage: Seat Belt System / Seat Belt Pretensioner (BPT) Description and operation
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH).
When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce the severity of injury to the front seat occupants
by retracting the seat belt webbing.
This prevents the front occupants from thrusting forward and hitting the steering
wheel or the instrument panel when the vehicle crashes.
Never attempt to measure the circuit resistance of the Seat Belt Pretensioner
(BPT) even if you are using the specified tester. If the circuit resistance
is measured with a tester, the pretensioner will be ignited accidentally.
This will result in serious personal injury.
|
Components
1. Seat Belt Pretensioner
(BPT)
...
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistance between terminals “+” and “-” of the evaporator temperature
sensor. ...
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally once the moisture
clears.
2. The sensor is covered with foreign matter, such as snow or water, or the sensor
cover is blocked. (It will operate normally when the materia ...