Other information:
Replacement
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
...
11. Immediately drive approximately 4~6 miles (7~10 km or, about 10 min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed
of 12 mph (20 km/h).
While driving, if you experience any unusual vibration, ride disturbance ...