Kia Sportage: If you have a flat tire / Jack and tools
.png)
The jack and wheel lug nut wrench are stored in the luggage compartment. Remove
the panel indicated in the illustration.
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
Jacking instructions
The jack is provided for emergency tire changing only.
To prevent the jack from “rattling” while the vehicle is in motion, store it
properly.
Follow jacking instructions to reduce the possibility of personal injury.
WARNING - Tire Jack
Do not place any portion of your body under a vehicle that is only supported
by a jack since the vehicle can easily roll off the jack. Use vehicle support stands.
WARNING - Changing tires
Never attempt vehicle repairs in the traffic lanes of a public road or highway.
- Always move the vehicle completely off the road and onto the shoulder
before trying to change a tire. The jack should be used on a firm level ground.
If you cannot find a firm, level place off the road, call a towing service company
for assistance.
- Be sure to use the correct front and rear jacking positions on the vehicle;
never use the bumpers or any other part of the vehicle for jack support.
- Do not allow anyone to remain in the vehicle while it is on the jack.
- Make sure any children present are in a secure place away from the road
and from the vehicle to be raised with the jack.
WARNING - Running vehicle on jack
Do not start or run the engine of the vehicle while the vehicle is on the
jack as this may cause the vehicle to fall off the jack.
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
store ...
Other information:
If you try to drive off depressing the accelerator pedal with the EPB
applied, but the EPB doesn't release automatically, a warning will sound and
a message will appear.
If the driver's seat belt is not fastened and the engine hood, driver's
door or trunk is opened, a war ...
Description
Electric E-CVVT system is electric continuous variable valve timing system.
It is located on the intake camshaft of the engine and uses motor rotation to
control the rotation angle of camshaft relative to the rotation of crankshaft
regardless of engine pressure. ...