Kia Sportage: Light bulbs / High mounted stop lamp bulb replacement
.png)
If the high mounted stop lamp (LED) does not operate, we recommend that you have
your vehicle checked by an authorized Kia dealer.
If the Back-up lamp and Rear turn signal lamp does not operate, we recommend
that you have your vehicle checked by an authorized Kia dealer. ...
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align ...
Other information:
Inspection
Throttle Position Sensor (TPS)
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
Throttle Angl ...
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt auto tensioner pulley (A).
Tightening torque :
53.9 - 63 ...