Signal Waveform
•
There is no separate sensor inside E-CVVT. Exhaust side 4-flank type
target wheel is applied in order to compare CKPS and CMPS and cal ...
Description
Fuel Pressure Control Valve is installed on the high pressure fuel pump and
controls fuel flow flowing into the injectors in accordance with the ECM signal
calculated ...
1. Turn the ignition switch and all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling the cover up.
When the blade type fuse is disconnected, remove it by using the clip designed for
changing fuses located in the engine compartment fuse box. Upon removal, secu ...