Other information:
■ Front
■ Rear
1. Open the tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the upper (front) / lower (rear) part of the
cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is
fully secured.
4. Remo ...
Remove
[Nu 2.0 MPI/ FFV, THETA II 2.4 GDI]
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the under cover. (Refer to Engine Mechanical System - "Engine
room under cover')
...