Other information:
If the multi fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reverse these steps to reinstall the multi fuse.
✽ NOTICE
D ...
1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic
locking clip.
CAUTION - Wiper arms
Do not allow the wiper arm to fall against the windshield, since it may chip
or crack the windshield.
2. Compress the clip and slide the blade assembly downward.
3. Lift it ...