Kia Sportage: Anti-theft System / UIP (Ultrasonic Intrusion Protection) Sensor Specifications

Kia Sportage QL (2015-2024) Service Manual / Body Electrical System / Anti-theft System / UIP (Ultrasonic Intrusion Protection) Sensor Specifications

Specifications
UIP sensor
Item
Specification
Normal operating voltage
DC 12 V
Operating voltage range
DC 9 - 16 V
Operating temperature
-40 - 185°F (-40 - 85°C)
Dark current
Disarm mode
Max. 0.5 mA (at DC 12 V)
Arm mode
Max. 3.5 mA (at DC 12 V)
Current consumption
Alarm mode
Max. 4.5 mA (at DC 12 V)

※ UIP sensor is installed in the overhead console lamp.
Siren & ACU (Alarm Control Unit) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the left luggage side trim. (Refer to Body - "Luggage S ...

UIP (Ultrasonic Intrusion Protection) Sensor Components and components location
Component Location ...

Other information:

Kia Sportage QL (2015-2024) Owners Manual: Normal Maintenance Schedule - Non Turbo Models


The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time are shown, the frequency of service is determined by whichever occurs first. I : Inspec ...

Kia Sportage QL (2015-2024) Service Manual: Repair procedures


General Inspection Before and after servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. ...

Copyright © www.ksportagegl.com 2015-2024