Kia Sportage: Smart key / Smart key precautions
- The smart key will not work if any of the following occur:
- The smart key is close to a radio transmitter such as a radio station or an
airport which can interfere with normal operation of the smart key.
- The smart key is near a mobile two way radio system or a cellular phone.
- Another vehicle’s smart key is being operated close to your vehicle.
- When the smart key does not work correctly, open and close the door with
the mechanical key and contact an authorized Kia dealer.
- If the smart key is in close proximity to your cellular phone or smart
phone, the signal from the smart key could be blocked by normal operation of
your cellular phone or smart phone. This is especially important when the phone
is active such as making a call, receiving calls, text messaging, and/or sending/
receiving emails. Avoid placing the smart key and your cellular phone or smart
phone in the same pants or jacket pocket and maintain adequate distance between
the two devices.
CAUTION - Transmitter
Keep the transmitter away from water or any liquid as it can become damaged
and not function properly.
✽ NOTICE
If the keyless entry system is inoperative due to exposure to water or liquids,
it will not be covered by your manufacturer’s vehicle warranty.
A maximum of 2 smart keys can be registered to a single vehicle.
If you happen to lose your smart key, you will not be able to start the engine.
You should immediately take the vehicle and remainin ...
A smart key battery should last for several years, but if the smart key is not
working properly, try replacing the battery with a new one. If you are unsure how
to use your smart key or replace th ...
Other information:
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which turn signal is operating.
They will self-cancel after a turn is completed. If the indicator continues ...
Circuit Diagram
Terminal Information
Terminal Illustration
Terminal Function
No.
Function
Connected to
1
Rail pressure sensor power (+5V)
ECM Connector A (10 ...