Kia Sportage: Service Mode / Service Interval

Kia Sportage QL (2015-2019) Owners Manual / Features of your vehicle / LCD Display / Service Mode / Service Interval

Service interval

It calculates and displays when you need a scheduled maintenance service (mileage or days).

If the remaining mileage or time reaches 900 mi. (1,500 km) or 30 days, “Service in” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.

Service required

If you do not have your vehicle serviced according to the already inputted service interval, the “Service required” message will appear.

The “Service required” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.

To reset the service interval to the mileage and days you inputted before:

Press the OK button (reset) for more than 1 second.

Service in OFF

If the service interval is not set “Service in OFF” message is displayed on the LCD display.

If you want to activate Service interval function, set the service interval in the User setting mode.

For more details, refer to “User setting mode" in this chapter.

✽ NOTICE

If any of the following conditions occurs, the mileage and days may be incorrect.

- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.

Tire Pressure
This mode displays the pressure status of each tire. You can change the tire pressure unit in "User settings" mode. ...

Master Warning Mode
• This warning light informs the driver the following situations - Blind Spot Detection (BSD) malfunction (if equipped) - Tire Pressure Monitoring System (TPMS) malfunction (if equipped) - Auto ...

Other information:

Kia Sportage QL (2015-2019) Service Manual: Field Effect Transistor (DATC) Repair procedures


Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Operate the control switch to raise the voltage up to high speed. ...

Kia Sportage QL (2015-2019) Service Manual: Front Strut Assembly Repair procedures


Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)    ...

Copyright © www.ksportagegl.com 2015-2019