Other information:
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reverse these steps to reinstall the main fuse.
✽ NOTICE
The ...
The driver can activate the AEB by placing the ignition switch to the ON position
and by selecting 'User Settings', 'Driving Assist', and 'Autonomous Braking System'.
The AEB deactivates, when the driver cancels the system setting.
The warning light illuminates on th ...