Kia Sportage: Hood / Opening the hood
![](images/opening_the_hood-116/1/page.h33.png)
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P (Park) position and setting the parking brake.
![](images/opening_the_hood-116/1/page.h34.png)
2. Go to the front of the vehicle, raise the hood slightly, push the secondary
latch (1) upward inside of the hood center and lift the hood (2).
3. Raise the hood.
![](images/opening_the_hood-116/1/page.h35.png)
4. Pull out the stay rod.
5. Hold the hood opened with the stay rod (1).
WARNING - Stay Rod
- To prevent from being burned by hot metal, grab the stay rod in the
area wrapped in rubber.
- Ensure the stay rod is completely inserted into the hole provided whenever
you inspect the engine compartment. This will prevent the hood from falling
and possibly injuring you.
The warning message will appear on the LCD display when hood is open.
The warning chime will operate when the vehicle is being driven at or above 3km/h
with the hood open. ...
Other information:
Components
[Standard Type (3.5")]
[Super Vision Type (4.3")]
Connector Pin Information
No.
Description
No.
Description
1
Ground
21
Trip switch (-) ...
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver
has a power window lock button which can block the operation of rear seat windows.
The power windows can be operated for approximately ...