Kia Sportage: What to do in an emergency / Emergency starting
.png)
Connect cables in numerical order and disconnect in reverse order.
If engine doesn't turn over or turns over slowly
1. Be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake
is set.
2. Check the battery connections to be sure they are c ...
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow these jump starting procedures.
If in doubt, we strongly recom ...
Other information:
Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).
3.
Remove the front se ...
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the vehicle in the back and senses and sets
off (visual and auditory) alarms for any vehicle coming into the blind spot.
–
...