Kia Sportage: Adaptive Cruise Control / Switching Intelligent Mode On and Off. Adjusting the Set Speed Tolerance - Vehicles With: Intelligent Adaptive Cruise Control

Lincoln Corsair Owners Manual / Adaptive Cruise Control / Switching Intelligent Mode On and Off. Adjusting the Set Speed Tolerance - Vehicles With: Intelligent Adaptive Cruise Control

Switching Intelligent Mode On and Off

WARNING: You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.

Use the touchscreen to select the following:

  1. Select Settings.
  2. Select Driver Assist..
  3. Select Cruise Control.

Changing the Set Speed with Intelligent Adaptive Cruise Control

When intelligent mode is on, the system adjusts the set speed to the speed limit detected by the camera and the speed limit information provided by the navigation system.

Note: The set speed adjusts when the system detects a different maximum speed limit.

Note: The speed limit information provided by the navigation map data may be inaccurate or out of date.

Note: The system alerts you if the set speed increases beyond the speed limit.

If the system does not detect a speed limit, the vehicle speed remains at the current set speed.

You can override the set speed at any time. You may need to override or cancel the system in certain situations such as inclement weather or if an incorrect speed is set.

Note: The system may not detect and read speed limit signs with conditional information, for example, when a sign is flashing, during specific time ranges, or when children are present.

Note: Under certain conditions, the system may not adjust the vehicle speed until after your vehicle passes the speed limit sign.

Adjusting the Set Speed Tolerance - Vehicles With: Intelligent Adaptive Cruise Control

You can set a permanent speed tolerance that is above or below the detected speed limit.

Use the touchscreen to select the following:

  1. Select Settings.
  2. Select Driver Assist.
  3. Select Cruise Control.
  4. Select Tolerance.
  5. Use + and - to set the tolerance.

Note: You cannot set the tolerance more than 20 mph (30 km/h) above or below the recognized speed.

Switching Lane Centering On and Off
The cruise controls are on the steering wheel. Press the button. The indicator appears in the information display. When the system is on, the color of the indicator changes to indicate the system ...

Adaptive Cruise Control – Troubleshooting
Adaptive Cruise Control – Information Messages - Vehicles With: Adaptive Cruise Control With Lane Centering Note: Depending on your vehicle options and instrument cluster type, not all messages d ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Hood Assembly Repair procedures


Replacement    Be careful not to damage the hood and body.    • When removing and installing the hood, an ...

Kia Sportage QL (2015-2021) Service Manual: PTC Heater Description and operation


Description The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effe ...

Copyright © www.ksportagegl.com 2015-2021