Kia Sportage: Automatic High Beam Control / Switching Automatic High Beam Control On and Off

Lincoln Corsair Owners Manual / Automatic High Beam Control / Switching Automatic High Beam Control On and Off

WARNING: Do not use the system in poor visibility, for example fog, heavy rain, spray or snow.

  1. Press Settings on the touchscreen.
  2. Press Vehicle.
  3. Press Lighting.

Activating the Automatic High Beam Control

Lincoln Corsair. Switching Automatic High Beam Control On and Off Switch the lighting control to the autolamps position.

Note: The lighting control defaults to autolamps each time you switch your vehicle on.

When active, the high beams turn on if:

When active, the high beams turn off if:

Note: The deactivation speed is lower on curves.

Note: High beam reactivation may be delayed in certain curvy road situations.

Note: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction or damage.

Note: The system may not operate properly in cold or inclement conditions. You can switch on the high beams by overriding the system.

Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the system goes into low beam mode until you clear the blockage. A message may appear in the information display if the camera is blocked.

Note: Using much larger tires or equipping vehicle accessories such as snowplows can modify your vehicle's ride height and degrade automatic high beam control performance.

 

 

Automatic High Beam Control
What Is Automatic High Beam Control The system turns on high beams if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street ...

Automatic High Beam Control Indicators. Overriding Automatic High Beam Control
Automatic High Beam Control Indicators The indicator illuminates to confirm when the system is ready to assist. Overriding Automatic High Beam Control WARNING: The system does not relieve you of y ...

Other information:

Kia Sportage QL (2015-2021) Service Manual: Rear Door Outside Handle Repair procedures


Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove inter ...

Kia Sportage QL (2015-2021) Owners Manual: Stop and tail lamp bulb replacement


1. Open the tailgate. 2. Open the service cover. 3. Loosen the light assembly retaining screws with a cross-tip screwdriver. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Disconnect the rear combination lamp connector. 6. Remove the socket from the assembly ...

Copyright © www.ksportagegl.com 2015-2021