Kia Sportage: Seatbelts / Fastening the Seatbelts

Lincoln Corsair Owners Manual / Seatbelts / Fastening the Seatbelts

The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

Lincoln Corsair. Fastening the Seatbelts

  1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.

    Lincoln Corsair. Fastening the Seatbelts

  2. To unfasten, press the release button and remove the tongue from the buckle.

    Lincoln Corsair. Fastening the Seatbelts

    When in use, place the rear seatbelts in the belt guides on the outermost seat backrests.

Using a Sliding Clip (If Equipped)

Lincoln Corsair. Fastening the Seatbelts

Slide the clip away from the tongue so there is no loose webbing when an occupant or child seat is buckled up. You can also use the sliding clip to raise the tongue and prevent it from rattling or to ease access to the tongue.

Using Seatbelts During Pregnancy

WARNING: Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure.

Lincoln Corsair. Fastening the Seatbelts

Pregnant women should always wear their seatbelt. Position the lap belt portion of a combination lap and shoulder belt low across the hips below the belly and worn as tight as comfort allows. Position the shoulder belt to cross the middle of the shoulder and the center of the chest.

Seatbelt Locking Modes

WARNING: If your vehicle is involved in a crash, have the seatbelts and associated components inspected as soon as possible. Failure to follow this instruction could result in personal injury or death.

All safety restraints in the vehicle are combination lap and shoulder belts. The driver seatbelt has the first type of locking mode, and the front outboard passenger and rear seatbelts have both types of locking modes described as follows:

Vehicle Sensitive Mode

This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the combination seatbelts lock to help reduce forward movement of the driver and passengers.

In addition, the retractor is designed to lock if you pull the webbing out too quickly. If the seatbelt retractor locks, slowly lower the height adjuster to allow the seatbelt to retract. If the retractor does not unlock, pull the seatbelt out slowly then feed a small length of webbing back toward the stowed position. For rear seatbelts, recline the rear seat backrest or push the seat backrest cushion away from the seatbelt. Feed a small length of webbing back toward the stowed position.

Automatic Locking Mode

In this mode, the shoulder belt automatically pre-locks. The belt still retracts to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver seatbelt.

When to Use the Automatic Locking Mode

Use this mode any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. Properly restrain children 12 years old and under in a rear seating position whenever possible.

How to Use the Automatic Locking Mode

Lincoln Corsair. Fastening the Seatbelts

  1. Buckle the combination lap and shoulder belt.
  2. Grasp the shoulder portion and pull downward until you pull the entire belt out. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the seatbelt is now in the automatic locking mode.

How to Disengage the Automatic Locking Mode

Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and turn on the vehicle sensitive (emergency) locking mode.

How to Extract Seatbelts in the Rear Outermost Positions

Seatbelts in the rear outermost positions can lock if you firmly return the seat backrest to its upright position. You can unlock the seatbelts using the following procedures.

For vehicles where the rear seats recline:

  1. Recline the seat to its full rear recline position.
  2. The seatbelt should then unlock.
  3. Return the seat backrest to your desired upright position.

For vehicles with rear seats that do not recline or are locked with the seat in its full rear recline position:

  1. Grasp the seatbelt webbing at the top of the seat backrest.
  2. Pull the seatbelt webbing forward, firmly.
  3. After pulling the seatbelt forward, allow the seatbelt to feed back into the seatbelt retractor as much as possible. If necessary, press the seat backrest down to allow the seatbelt webbing to retract further.
  4. The seatbelt should then unlock.
  5. If the seatbelt does not unlock, repeat steps 1-3.
Principle of Operation
WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Children must always be properly restrained. WARNING: Do not allow a passenger to ...

Seatbelt Height Adjustment. Seatbelt Warning Lamp and Indicator Chime
Seatbelt Height Adjustment WARNING: Position the seatbelt height adjuster so that the belt rests across the middle of your shoulder. Failure to adjust the seatbelt properly could reduce the effect ...

Other information:

Kia Sportage QL (2015-2021) Owners Manual: Checking the amount of air conditioner refrigerant and compressor lubricant


When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative influence on the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by an authorized Kia dealer. WARNING The oil and refrigeran ...

Kia Sportage QL (2015-2021) Service Manual: Side Airbag (SAB) Module Repair procedures


Replacement 1. Disconnect the battery negative terminal.    After disconnecting the cables, wait at least 30 seconds. 2. ...

Copyright © www.ksportagegl.com 2015-2021