Kia Sportage: Brakes / Auto Hold (IF EQUIPPED)

Lincoln Corsair Owners Manual / Brakes / Auto Hold (IF EQUIPPED)

WARNING: The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake.

WARNING: You must remain in your vehicle when the system turns on. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death.

WARNING: The system turns off if there is a malfunction or if you excessively rev the engine.

The system is designed to apply the brakes to hold your vehicle at a standstill after you stop your vehicle and release the brake pedal. This could be beneficial in certain situations, for example when waiting on a hill or in traffic.

Switching Auto Hold On and Off

Lincoln Corsair. Auto Hold (IF EQUIPPED) Press the button in the instrument panel to access the Auto Hold feature on the touchscreen.

Note: You can only switch the system on after you close the driver door, fasten your seatbelt and start the engine.

Note: The system remembers the last setting when you start your vehicle.

Make sure you switch the system off before towing with your vehicle or before using an automatic car wash.

Using Auto Hold

  1. Use the brakes to bring your vehicle to a complete stop. The auto hold active indicator illuminates in the information display.
  2. Release the brake pedal. The system holds your vehicle at a standstill. The auto hold active indicator remains illuminated in the information display.

    Note: The system only activates if you apply enough brake pressure. If your vehicle is on a steep slope, you need to press the brake pedal harder before the system activates.

    Note: Under certain conditions, the system could apply the electric parking brake. The brake system warning lamp illuminates. The electric parking brake releases when you press the accelerator pedal.

    Note: If auto-start-stop turns off the engine, auto hold remains active.

    Note: The system deactivates if you shift into reverse (R) and press the brake pedal.

  3. Pull away in the normal manner. The system releases the brakes and the auto hold active indicator turns off.

Auto Hold Indicator

Lincoln Corsair. Auto Hold (IF EQUIPPED)

The auto hold indicator is shown in the information display. The indicator illuminates in green when the system is active. Your vehicle remains stationary after you release the brake pedal.

Lincoln Corsair. Auto Hold (IF EQUIPPED) Illuminates in grey when auto hold is on but unavailable to hold your vehicle at a standstill.

The system could be unavailable when any of the following occur:

Hill Start Assist (IF EQUIPPED)
WARNING: The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake. WARNING: You must remain in your vehicle when the system turns on. At all time ...

Reverse Braking Assist
...

Other information:

Kia Sportage QL (2015-2021) Owners Manual: High beam operation


To turn on the high beam headlamp, push the lever away from you. The lever will return to its original position. The high beam indicator will light when the headlight high beams are switched on. To turn off the high beam headlamp, pull the lever to you when the high beam is on. The lever w ...

Kia Sportage QL (2015-2021) Owners Manual: Air bag non-inflation conditions


• In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts in such collisions. • Air bags are not designed to inflate in rear collisions, because occup ...

Copyright © www.ksportagegl.com 2015-2021